Hot Water System Installation Perth

Perth’s Trusted Hot Water System Installers

New Installation or Upgrading an Old System?

If your system is leaking, rusty, struggling to keep up, or leaving you timing your showers, it’s time for a change! At GA PERRY, we specialise in hot water system installation across Perth, helping homeowners and businesses replace or upgrade their systems with confidence. 

With licenced plumbers, electricians and gas fitters all under one roof, we handle everything from expert advice and system selection through to safe installation, testing and clean-up,  so you can enjoy reliable hot water again, without the stress.

  • Clear, upfront pricing: Fixed quotes with no hidden surprises
  • Done right, first time: Fully compliant installations using new fittings and valves
  • Trusted local experience: Family-run Perth business backed by over a century of know-how and expertise. 


Book your hot water system installation today and get reliable hot water back,
fast.

hot water system installation perth

Gas storage hot water systems use a gas burner to heat water in an insulated tank, providing strong, consistent hot water across multiple outlets.

Our gas storage hot water installations are ideal if you:

  • Have natural gas available
  • Need reliable hot water for busy households or commercial use
  • Want faster heat recovery compared to many electric systems

We handle the full installation process, including correct sizing, safe gas connections, new valves and fittings, and thorough testing before handover.

Instant / Continuous Flow Hot Water Installation

Instant (continuous flow) electric and instant gas systems heat water on demand, without storing it in a tank.

These systems are commonly installed where:

  • Continuous hot water is required
  • Space is limited
  • Energy efficiency is a priority

Our team completes all plumbing, gas and electrical connections, ensures correct ventilation and compliance, and commissions your system so it’s ready to perform from day one.

Electric hot water systems are a practical and cost-effective choice where gas isn’t available.

We often install electric storage systems when:

  • Replacing an older electric unit
  • Connecting to off-peak power or solar PV
  • A straightforward installation is preferred

Our licensed electricians and plumbers manage the entire installation, including electrical connections, pressure valves and system testing, with clear guidance on running costs and system care.

GA PERRY always has transparent pricing. Click here to see our rates.
Request a quote online or call us now on 08 9475 1500

closeup of GA PERRY van with plumbers, electricians and gas fitters

Hot Water System Replacement Made Simple

Our Installation Process

From the moment we arrive to final handover, our process is designed to be smooth, compliant and stress-free.

  • Arrival within the agreed time window: We show up when we say we will. If we don’t arrive on time, the first hour of labour is FREE.
  • Assessment and system confirmation: Before any work begins, we confirm the selected system, installation location and safety requirements. We also ensure your new hot water system is correctly sized and positioned to suit your household or business needs.
  • Fully licensed installation: All plumbing, gas and electrical work is completed by our licenced plumbers, electricians and gas fitters. No third-party trades. No shortcuts.
  • Removal of your old system (where required): Your existing hot water unit is safely disconnected from plumbing, gas and electricity and removed as part of the job if included in your quote.
  • New fittings, valves and connections: We install new, compliant valves and fittings to ensure safety, performance and long-term reliability.
  • Testing, commissioning and clean-up: Once installed, we thoroughly test the system, check for leaks, confirm correct operation and leave the area clean and tidy. 

Fast, Reliable and Affordable Installation

The Trusted Choice for Hot Water System Installation

No hot water? Don’t wait around. Our team is ready to get your new system installed quickly, safely and with zero hassle.

Trusted across Perth, we make hot water installation simple,  from expert advice to fast turnaround and quality workmanship you can count on.

Upfront Pricing & Clear Communication

You’ll receive fixed, upfront pricing with no surprises, along with a clear walkthrough of how to use and care for your new hot water system.

Our team has hands-on experience installing and replacing systems from all leading manufacturers, including:

This means we can confidently install, replace or upgrade your system to manufacturer standards, regardless of brand.

Our service doesn’t stop once your system is installed. We also offer ongoing maintenance and support to help extend the life of your hot water system and keep it running efficiently. Maintenance includes:

  • Testing the pressure relief valve
  • Inspecting the anode rod
  • Flushing out sediment from the tank
  • Checking for leaks and ensuring all components are functioning correctly
  • Providing advice on optimal system use to prevent future issues

If anything seems off, our team is ready to provide fast, reliable repairs and servicing across Perth, so your hot water is always working when you need it.

From family homes to commercial premises, we install hot water systems for both residential and commercial clients, tailoring solutions to suit usage demands, compliance requirements and budgets.

perth hot water system installation

 Is Your Hot Water System Failing, Leaking or Just Past Its Prime?

More About Emergency Hot Water Installation

Frequently Asked Questions

Timing depends on when you contact us, system availability and the complexity of the installation. When you call GA PERRY, we’ll give you a clear timeframe upfront.

Yes. We regularly supply and install hot water systems across Perth, including gas storage, instant gas and electric storage units. If you’ve already purchased a system, talk to us, installation-only options may be available depending on the unit and setup.

This depends on the age, condition and type of fault. Minor issues on newer systems can often be repaired. However, if your unit is older, leaking, rusted or has required multiple repairs, replacement is usually the more cost-effective and reliable option. We’ll explain the pros and cons clearly so you can make an informed decision.

The right size depends on how many people live in your home, how many bathrooms you have and how you use hot water day to day. Smaller households may suit compact storage or instant systems, while larger families often need higher-capacity units. We’ll recommend the right size after asking a few simple questions.

How do I choose the right hot water system for my home?

Choosing a new hot water system can feel overwhelming. We help Perth homeowners balance cost, reliability and energy efficiency by considering:

  • Household size and usage: Number of occupants and simultaneous water use
  • Existing services: Gas, electric or both (staying with the same energy source can reduce costs)
  • Upfront vs running costs: Cheaper systems can sometimes cost more to run long-term
  • Installation space: Whether a storage tank fits or a compact continuous-flow unit is better

Our advice is practical and brand-agnostic. We’ll suggest suitable options rather than pushing a single system.

Common signs it may be time for replacement include:

  • Age (often 8–12+ years for many storage systems)
  • Rusty or discoloured water
  • Frequent leaks or repeat repairs
  • Inconsistent water temperature or pressure

We provide hot water system replacement across Perth, including like-for-like swaps and upgrades to more energy-efficient models, with clear guidance every step of the way.

Costs vary depending on the type of system, installation complexity and any upgrades required. We provide fixed, upfront pricing before work begins, so you know exactly what to expect, no hidden fees or surprises.

Most standard hot water installations are completed within a few hours. More complex installations or system changes may take longer. We’ll confirm expected timeframes with you before starting.

Yes. We provide 24/7 emergency hot water repairs across Perth. If you’ve lost hot water or have a serious leak, call us anytime on 08 9475 1500, and we’ll arrange help as quickly as possible.

They are. GA PERRY holds plumbing and electrical contractor licences, and our team includes licensed plumbers, electricians and gas fitters. This ensures your hot water system installation in Perth is completed safely, correctly and in line with current regulations.

Regular maintenance helps extend the life of your hot water system, improves efficiency and reduces the risk of unexpected breakdowns. Simple checks can catch issues early and help keep your system running reliably for years to come.

Find a Perth hot water plumber near you

Expert Plumbing Services Across Perth

Need hot water sorted fast? We install and replace systems right across Perth, from the northern suburbs to the south, and out to the hills.

We service suburbs including:

Applecross, Armadale, Balcatta, Baldivis, Bayswater, Belmont, Bentley, Canning Vale, Cannington, Claremont, Cockburn, Como, Cottesloe, Dianella, Fremantle, Gosnells, Guildford, Inglewood, Joondalup, Karrinyup, Leederville, Leeming, Mandurah, Maylands, Midland, Mosman Park, Mount Lawley, Nedlands, North Perth, Osborne Park, Rockingham, Scarborough, South Perth, Subiaco, Victoria Park, Wembley, Willetton and more.

Â