Bosch 13H Instant Gas Hot Water System Hot Water Systems Perth

Bosch 13H Instant Gas Hot Water System

Installation, repair and servicing throughout Perth

Bosch 13H Instant Gas Hot Water System

The Bosch 13H Instant Gas Hot Water System (TF325-8G) is a compact and efficient continuous flow unit that utilises HydroPower ignition technology—requiring no electricity to operate. It is powered by water flow, making it ideal for energy-conscious homes and off-grid installations. With a delivery rate of 13 litres per minute at a 25°C temperature rise, it offers a reliable hot water solution for smaller households. This external system is equipped with advanced safety features and delivers hot water only when needed, reducing energy waste.

FEATURES:

Heating Method:
Gas burner with HydroPower ignition – no mains power required

Hot Water Supply:
Continuous flow – heats water on demand

Recovery Time:
Instantaneous – water is heated as it flows through the system

Installation Location:
Outdoor wall-mounted installation only

Water Pressure:

  • Maximum (static): 800 kPa
  • Minimum operating: 40 kPa
  • Minimum constant pressure for minimum flow: 100 kPa
  • Minimum constant pressure for maximum flow: 140 kPa

Energy Efficiency:
N/A – Star rating not specified

Operating Costs:
Economical operation as it heats only when required; no pilot light or standby energy use

Best for:

  • Small to medium-sized households
  • Homes with 1 bathroom
  • Properties without 240V power (e.g. rural or off-grid locations)

Number of Bathrooms and People (Capacity):

  • 1 bathroom
  • Suitable for 2–3 people depending on climate and usage

     

Additional features:

  • No electrical connection required – ideal for areas without power
  • Hydrogenerator-powered ignition: ignites when water flows
  • LED status indicators (green = flame detected, red = fault)
  • Adjustable gas and water flow controls for fine temperature regulation
  • Water filter included at cold water inlet to prevent internal blockage
  • Not suitable for commercial, recirculation, or solar booster use
  • Requires servicing every 2 years to maintain performance
  • Built-in flame failure detection and overtemperature protection

Specifications

Hot Water Delivery 13 L/min at 25°C rise
Gas Consumption 104 MJ/h (Natural Gas or LPG)
Weight (Empty) 22 kg
Height 845 mm
Width 405 mm
Depth 240 mm

Warranties

Manufacturers Tank Warranty (Domestic 10 years on heat exchanger (parts only)
Manufacturers Parts & Labour Warranty (Domestic) 2 Years

Technical Specifications

Powerpoint Required: No
Gas Connection: Natural Gas: 3/4" LPG: 1/2"
Hot Water Connection: 1/2" BSP
Water flow range: 4 to 13 L/min
Temperature rise (max setting): 50°C
Temperature rise (min setting): 25°C
Minimum ignition flow rate: 3.2 L/min

Related Products