Vulcan 80Ltr Electric Storage Hot Water System

Small homes or flats needing consistent hot water will find a robust and effective solution in the Vulcan 80Ltr Electric Storage Hot Water System. Constructed using high-strength steel and a vitreous enamel-lined tank, this Australian-made hot water system provides a ten-year cylinder warranty and long-lasting performance. Designed for both indoor and outdoor installation, the Vulcan 80 liter model is simple to install and serviceable, which makes it a perfect choice for consumers seeking a small, mains pressure electric storage water heater.

FEATURES:

Heating Method:
Electric immersion element with thermostat control

Hot Water Supply:
Mains pressure – continuous hot water from a storage tank

Recovery Time:
Rapid recovery for moderate daily use (typical electric storage profile)

Installation Location:
Indoor or outdoor installation

Water Pressure:

• With Expansion Control Valve: 680 kPa
• Without Expansion Control Valve: 800 kPa
• Relief Valve Setting: 1000 kPa

Energy Efficiency:
N/A – Not assigned a star rating

Operating Costs:
Suitable for connection to continuous tariff for stable hot water and energy usage control

Best for:

• Small households
• Apartments or small dwellings
• Locations needing flexible indoor/outdoor electric installation

Number of Bathrooms and People (Capacity):

• Suitable for 1–2 people on a continuous tariff
• Recommended for 1 bathroom or low-moderate demand usage

Additional features:

• High-strength steel cylinder with enamel lining for durability
• Manufactured in Australia by Rheem
• Suitable for hard water areas with correct anode use
• Optional safe tray installation for high-risk areas
• Compliant with Australian Standards for installation and electrical safety

Small homes, flats, and point-of- use projects all benefit from the small yet effective water heating capacity of the Vulcan 50Ltr Electric Storage Hot Water System. Constructed of vitreous enamel lining and high-strength steel, this dual-handed system offers flexibility and longevity for installation either indoors or outdoors. Designed by Rheem and backed by a 7-year cylinder warranty, the Vulcan 50L is a perfect low-cost solution for consumers who need dependable hot water with low space demand.

FEATURES:

Heating Method:
Electric immersion element

Hot Water Supply:
Mains pressure storage system

Recovery Time:
Rapid recovery for small demands (reheating after each use)

Installation Location:
Indoor or outdoor; wall-mountable using bracket kit

Water Pressure:

• With Expansion Control Valve: max 680 kPa
• Without Expansion Control Valve: max 800 kPa
• Relief Valve Setting: 1000 kPa

Energy Efficiency:
N/A – Energy star rating not specified for electric models

Operating Costs:
Economical for small volume usage; insulation reduces standby heat loss

Best for:

• Small homes, apartments, offices
• Point-of-use locations (e.g. laundry, kitchenette)
• 1-person households or low hot water demand settings
  
  

Number of Bathrooms and People (Capacity):

• People: 1–2 on continuous tariff
  
  

Bathrooms: Suitable for single sink or low-demand outlet

Additional features:

• Vitreous enamel-lined steel tank for corrosion resistance
• Compact footprint – ideal for limited spaces
• Plastic dip tubes/fittings for proper flow operation
• Compatible with safe trays (recommended where property damage may occur)
• Designed for both indoor and outdoor installation without modification

The Vulcan 125Ltr Electric Storage Hot Water System is a durable, mains pressure hot water solution designed for Australian homes. Featuring a high-strength vitreous enamel-lined steel tank and backed by a 10-year cylinder warranty, this system offers reliable and consistent hot water for small to medium-sized households.  The performance, longevity, and ease of maintenance that the Vulcan 125L offers make it an ideal choice for both indoor and outdoor installation at an affordable price.

FEATURES:

Heating Method:
Electric immersion element with thermostat

Hot Water Supply:
Mains pressure storage tank – delivers full pressure to multiple outlets

Recovery Time:
Typical electric storage recovery – reheats when needed; thermostat controlled

Installation Location:
Indoor or outdoor installation allowed

Water Pressure:

• With Expansion Control Valve: 680 kPa
• Without Expansion Control Valve: 800 kPa
• Relief Valve Setting: 1000 kPa

Energy Efficiency:
N/A – No official energy star rating listed

Operating Costs:
Compatible with continuous or extended off-peak electricity tariffs for cost efficiency

Best for:

• Small to medium households
• Applications needing moderate hot water capacity
• Homes upgrading older electric systems with compact dimensions
  
  

Number of Bathrooms and People (Capacity):

• People: 2–3 on continuous tariff
• Bathrooms: Ideal for 1 bathroom use
  
  

Additional features:

• Built with corrosion-resistant materials suitable for varied water conditions
• Complies with AS/NZS standards for indoor/outdoor electric water heating
• Manufactured by Rheem in Australia
• Safe tray installation recommended where property damage from leaks is a concern
• Designed for use with temperature limiting devices to protect against scalding

The Stiebel DEL 27 Plus is the most powerful model in the DEL Plus range, offering high-capacity, three-phase instantaneous electric hot water delivery. German-engineered and featuring advanced 3i technology, the DEL 27 Plus ensures rapid and consistent temperature-controlled hot water at up to 50 °C. Larger homes or businesses needing several hot water outlets simultaneously will find this model ideal with a digital display, ECO water-saving mode, memory temperature settings, and anti-scalding protection.

FEATURES:

Heating Method:
Electric – bare wire heating system with electronic output control

Hot Water Supply:
Instantaneous – no storage tank, water heated on demand

Recovery Time:
Instantaneous – delivers continuous hot water when required

Installation Location:
Indoor installation – suitable for under-sink or over-sink applications

Water Pressure:

• Maximum permissible pressure: 1000 kPa
• Minimum flow to activate: 2.5 L/min

Energy Efficiency:
N/A – no star rating; however, features ECO mode for water and energy saving

Operating Costs:
Economical operation with 3-stage ECO flow-limiting settings (6, 7, or 8 L/min) to reduce consumption

Best for:

• Large households or shared bathrooms
• Offices, gyms, or commercial sites
• Areas with high hot water demand at multiple outlets

Number of Bathrooms and People (Capacity):

• Suitable for 2–3 bathrooms
• Ideal for 4–6 people depending on usage and climate

Additional features:

• ECO flow limitation: 3 adjustable levels for energy/water saving
• User-friendly interface with backlit LCD screen
• Two programmable memory temperature buttons
• Anti-scalding protection with optional factory jumper set to 43 °C
• Air detection system to prevent heating system damage
• Suitable for use with preheated water (e.g., solar systems)
• Optional wireless remote control (FFB 4 Set) for convenience

Designed in Germany, the 3-phase, high-performance Stiebel DEL 18 Plus electric instantaneous hot water system provides exact, energy-efficient hot water without a tempering valve by including advanced 3i technology and electronic output control. With memory temperature settings, ECO water-saving modes, and a built-in child safety lock for anti-scalding protection, the DEL 18 Plus—designed for durability and user comfort—is perfect for home and light business use, it guarantees AS3498 criteria’ consistent hot water delivery at up to 50°C.

FEATURES:

Heating Method:
Electric – bare wire heating system with electronic output control

Hot Water Supply:
Instantaneous – heats water on demand, no storage tank required

Recovery Time:
Instantaneous – delivers continuous hot water as required

Installation Location:
Indoor wall-mounted installation (undersink or oversink configuration)

Water Pressure:

• Maximum: 1000 kPa
• Minimum operating (switch-on flow rate): 2.5 L/min

Energy Efficiency:
N/A – no energy star rating assigned, but energy-saving ECO modes available

Operating Costs:
Reduced through on-demand heating and selectable ECO levels limiting water flow to 6, 7, or 8 L/min

Best for:

• Homes with 1–2 bathrooms
• Apartments and offices
• Eco-conscious households seeking space-saving electric solutions

Number of Bathrooms and People (Capacity):

• Suitable for 1–2 bathrooms
• Best for 2–4 people, depending on local water temperature and application

Additional features:

• Factory pre-set max outlet temperature of 50°C – no tempering valve needed (AS3498 compliant)
• ECO Mode with three flow restriction settings (6, 7, 8 L/min)
• Memory function for two custom temperatures
• Backlit multifunctional LCD display
• Child safety and anti-scalding protection via internal limiters
• Compatible with optional wireless remote control (FFB 4 Set)
• Built-in diagnostics with fault code display

Thermann 125L Electric Storage Hot Water System’s commercial-grade enamel and thicker anode make it built to last and provide a consistent hot water supply. The Thermann 125L’s dual-handed connection design, thick foam insulation, and Australian manufacturing quality combine sensibly to offer capacity, efficiency, and convenience for regular home use. For daily residential use, the Thermann 125L provides a useful balance of capacity, efficiency, and convenience thanks to its dual-handed connection design, thick foam insulation, and Australian manufacturing quality.

FEATURES:

Heating Method:
Electric immersion element

Hot Water Supply:
Storage system providing ready-to-use hot water from an insulated tank

Recovery Time:
Dependent on element size; commonly 3.6 kW element – moderate recovery rate

Installation Location:
Can be installed indoors or outdoors

Water Pressure:

• Max inlet pressure (without ECV): 800 kPa
• Max inlet pressure (with ECV): 650 kPa

Energy Efficiency:
N/A – no star rating provided for this electric storage model

Operating Costs:
Low heat loss due to 50 mm thick dense foam insulation; contributes to reduced energy costs

Best for:

• Small to medium families
• Households of 2–3 people with moderate hot water usage

Number of Bathrooms and People (Capacity):

• Suitable for 2–3 people for continuous electric usage

Designed for those limited spaces, including offices, small homes, and apartment kitchens, the Thermann 50L Electric Storage Hot Water System provides the simplicity of use, with its “V-Fit” dual-handed plumbing design to allow for flexible installation to fit your needs. This hot water system depends on its solid Australian engineering and low height of just 670mm to provide continuous hot water even in a small space.

FEATURES:

Heating Method: Electric immersion element

Hot Water Supply: Mains pressure

Recovery Time: Not specified

Installation Location: Indoor or outdoor; suitable for tight cupboards

Water Pressure: Maximum inlet pressure of 800 kPa (650 kPa with ECV)

Energy Efficiency: N/A

Operating Costs: Cost-effective for low-demand applications

Best for: Apartments, single-person households, or small offices

Number of Bathrooms and People (Capacity): 1 person – continuous use

Additional Features:

• Compact design for tight installations
• “V-Fit” plumbing configuration for easier access
• Dual-handed inlet/outlet for flexible positioning
• Suitable for replacement of older units in restricted areas
• Available in “appliance white” finish for a cleaner aesthetic

Small homes or areas where hot water needs aren’t particularly high would find great use for the Thermann 80L Electric Storage Hot Water System. Made proudly right here in Australia, this system has top-notch insulation and a tough commercial-grade enamel tank to help keep the water hot and save energy costs. Install it indoors or outdoors; its small form and easy dual-handed inlet/outlet design make it simple. Perfect for people seeking consistent hot water free of effort!

FEATURES:

Heating Method: Electric

Hot Water Supply: Mains pressure, full flow to all outlets

Recovery Time: Moderate – suited to continuous daily use

Installation Location: Indoor or outdoor installation permitted

Water Pressure: Rated for 800 kPa maximum inlet pressure without an ECV (650 kPa with ECV)

Energy Efficiency: N/A

Operating Costs: Reduced running costs due to 50mm dense foam insulation

Best for: Small households with 1–2 people; ideal for units, studios, or low-use applications

Additional Features:

• Dual-handed plumbing connections for ease of installation
• Hard-wearing polymer base, rust-proof
• Compact footprint – suitable for space-restricted areas
• Australian-made with a commercial-grade enamel tank
• Dense insulation for heat retention and energy savings

Should you be looking for a dependable hot water system, the Thermann 160L Electric Storage Hot Water System is most certainly worth giving some thought. Families who always need hot water will find this to be a great option. It will be with you when most needed, so simplifying those busy mornings! Perfect for medium-sized houses, this system is energy-efficient and supplies hot water just when you need it. Designed in Australia, it has dual-handed plumbing, which makes installation easy. It’s made to last with premium commercial-grade enamel and complete mains pressure performance.

FEATURES:

Heating Method:
Electric storage heating element.

Hot Water Supply:
Mains pressure hot water delivery to all outlets.

Recovery Time:
Not specified directly; typical of electric storage tanks in this size category.

Installation Location:
Indoor or outdoor installations are supported.

Water Pressure:
Maximum inlet pressure without ECV: 800 kPa
Maximum inlet pressure with ECV: 650 kPa.

Energy Efficiency:
N/A

Operating Costs:
Reduced heat loss due to 50 mm dense foam insulation, which helps lower running costs.

Best for:
Medium-sized households requiring efficient and reliable hot water, suited for continuous hot water demand of 2–4 people.

Number of Bathrooms and People (Capacity):

• Suitable for 2 to 4 people under continuous tariff supply.

Additional Features:

• Dual-handed water connections for easier installation
• Commercial-grade enamel lining and thicker sacrificial anode for longer tank life
• Rust-proof polymer base
• Australian-made
• Designed for compatibility with various water conditions in Australia and New Zealand
• Compliant with AS/NZS standards for electrical and plumbing installations

The Wilson Super X Instant Electric Hot Water System (V6 model) is a flexible, energy-efficient, and Australian-made water heater designed for instant hot water delivery. Without a storage tank or automatic flow control, heating water exactly as needed reduces energy waste and maximises efficiency. Perfect for those looking for a consistent, continuous electric hot water source, the Super X is small and flexible. 

FEATURES:

Heating Method:
Electric element heating – instantaneous (no storage tank)

Hot Water Supply:
Continuous flow – heats water as it passes over the elements

Recovery Time:
Instantaneous – continuous heating as water flows through

Installation Location:
Indoor or outdoor installation (flexible location suitability)

Water Pressure:

• Maximum supply pressure: 1050 kPa
• Automatic flow control built-in

Energy Efficiency:
N/A – No star rating provided, but promotes energy efficiency due to no standby heat loss

Operating Costs:
Efficient due to no heat loss from storage; only operates on demand

Best for:

• Small homes
• Commercial amenities
• Factory or workplace installations where compact continuous hot water is needed

Additional Features:

• Made in Australia
• Quiet operation
• Watermark approved
• Easy, standard replacement installation
• Includes optional expansion valve and ball valve
• Watermark approved
• Electrical cutout switch safety feature