Vulcan 80Ltr Electric Storage Hot Water System

Small homes or flats needing consistent hot water will find a robust and effective solution in the Vulcan 80Ltr Electric Storage Hot Water System. Constructed using high-strength steel and a vitreous enamel-lined tank, this Australian-made hot water system provides a ten-year cylinder warranty and long-lasting performance. Designed for both indoor and outdoor installation, the Vulcan 80 liter model is simple to install and serviceable, which makes it a perfect choice for consumers seeking a small, mains pressure electric storage water heater.

FEATURES:

Heating Method:
Electric immersion element with thermostat control

Hot Water Supply:
Mains pressure – continuous hot water from a storage tank

Recovery Time:
Rapid recovery for moderate daily use (typical electric storage profile)

Installation Location:
Indoor or outdoor installation

Water Pressure:

• With Expansion Control Valve: 680 kPa
• Without Expansion Control Valve: 800 kPa
• Relief Valve Setting: 1000 kPa

Energy Efficiency:
N/A – Not assigned a star rating

Operating Costs:
Suitable for connection to continuous tariff for stable hot water and energy usage control

Best for:

• Small households
• Apartments or small dwellings
• Locations needing flexible indoor/outdoor electric installation

Number of Bathrooms and People (Capacity):

• Suitable for 1–2 people on a continuous tariff
• Recommended for 1 bathroom or low-moderate demand usage

Additional features:

• High-strength steel cylinder with enamel lining for durability
• Manufactured in Australia by Rheem
• Suitable for hard water areas with correct anode use
• Optional safe tray installation for high-risk areas
• Compliant with Australian Standards for installation and electrical safety

Small homes, flats, and point-of- use projects all benefit from the small yet effective water heating capacity of the Vulcan 50Ltr Electric Storage Hot Water System. Constructed of vitreous enamel lining and high-strength steel, this dual-handed system offers flexibility and longevity for installation either indoors or outdoors. Designed by Rheem and backed by a 7-year cylinder warranty, the Vulcan 50L is a perfect low-cost solution for consumers who need dependable hot water with low space demand.

FEATURES:

Heating Method:
Electric immersion element

Hot Water Supply:
Mains pressure storage system

Recovery Time:
Rapid recovery for small demands (reheating after each use)

Installation Location:
Indoor or outdoor; wall-mountable using bracket kit

Water Pressure:

• With Expansion Control Valve: max 680 kPa
• Without Expansion Control Valve: max 800 kPa
• Relief Valve Setting: 1000 kPa

Energy Efficiency:
N/A – Energy star rating not specified for electric models

Operating Costs:
Economical for small volume usage; insulation reduces standby heat loss

Best for:

• Small homes, apartments, offices
• Point-of-use locations (e.g. laundry, kitchenette)
• 1-person households or low hot water demand settings
  
  

Number of Bathrooms and People (Capacity):

• People: 1–2 on continuous tariff
  
  

Bathrooms: Suitable for single sink or low-demand outlet

Additional features:

• Vitreous enamel-lined steel tank for corrosion resistance
• Compact footprint – ideal for limited spaces
• Plastic dip tubes/fittings for proper flow operation
• Compatible with safe trays (recommended where property damage may occur)
• Designed for both indoor and outdoor installation without modification

The Vulcan 125Ltr Electric Storage Hot Water System is a durable, mains pressure hot water solution designed for Australian homes. Featuring a high-strength vitreous enamel-lined steel tank and backed by a 10-year cylinder warranty, this system offers reliable and consistent hot water for small to medium-sized households.  The performance, longevity, and ease of maintenance that the Vulcan 125L offers make it an ideal choice for both indoor and outdoor installation at an affordable price.

FEATURES:

Heating Method:
Electric immersion element with thermostat

Hot Water Supply:
Mains pressure storage tank – delivers full pressure to multiple outlets

Recovery Time:
Typical electric storage recovery – reheats when needed; thermostat controlled

Installation Location:
Indoor or outdoor installation allowed

Water Pressure:

• With Expansion Control Valve: 680 kPa
• Without Expansion Control Valve: 800 kPa
• Relief Valve Setting: 1000 kPa

Energy Efficiency:
N/A – No official energy star rating listed

Operating Costs:
Compatible with continuous or extended off-peak electricity tariffs for cost efficiency

Best for:

• Small to medium households
• Applications needing moderate hot water capacity
• Homes upgrading older electric systems with compact dimensions
  
  

Number of Bathrooms and People (Capacity):

• People: 2–3 on continuous tariff
• Bathrooms: Ideal for 1 bathroom use
  
  

Additional features:

• Built with corrosion-resistant materials suitable for varied water conditions
• Complies with AS/NZS standards for indoor/outdoor electric water heating
• Manufactured by Rheem in Australia
• Safe tray installation recommended where property damage from leaks is a concern
• Designed for use with temperature limiting devices to protect against scalding

Thermann 125L Electric Storage Hot Water System’s commercial-grade enamel and thicker anode make it built to last and provide a consistent hot water supply. The Thermann 125L’s dual-handed connection design, thick foam insulation, and Australian manufacturing quality combine sensibly to offer capacity, efficiency, and convenience for regular home use. For daily residential use, the Thermann 125L provides a useful balance of capacity, efficiency, and convenience thanks to its dual-handed connection design, thick foam insulation, and Australian manufacturing quality.

FEATURES:

Heating Method:
Electric immersion element

Hot Water Supply:
Storage system providing ready-to-use hot water from an insulated tank

Recovery Time:
Dependent on element size; commonly 3.6 kW element – moderate recovery rate

Installation Location:
Can be installed indoors or outdoors

Water Pressure:

• Max inlet pressure (without ECV): 800 kPa
• Max inlet pressure (with ECV): 650 kPa

Energy Efficiency:
N/A – no star rating provided for this electric storage model

Operating Costs:
Low heat loss due to 50 mm thick dense foam insulation; contributes to reduced energy costs

Best for:

• Small to medium families
• Households of 2–3 people with moderate hot water usage

Number of Bathrooms and People (Capacity):

• Suitable for 2–3 people for continuous electric usage

Designed for those limited spaces, including offices, small homes, and apartment kitchens, the Thermann 50L Electric Storage Hot Water System provides the simplicity of use, with its “V-Fit” dual-handed plumbing design to allow for flexible installation to fit your needs. This hot water system depends on its solid Australian engineering and low height of just 670mm to provide continuous hot water even in a small space.

FEATURES:

Heating Method: Electric immersion element

Hot Water Supply: Mains pressure

Recovery Time: Not specified

Installation Location: Indoor or outdoor; suitable for tight cupboards

Water Pressure: Maximum inlet pressure of 800 kPa (650 kPa with ECV)

Energy Efficiency: N/A

Operating Costs: Cost-effective for low-demand applications

Best for: Apartments, single-person households, or small offices

Number of Bathrooms and People (Capacity): 1 person – continuous use

Additional Features:

• Compact design for tight installations
• “V-Fit” plumbing configuration for easier access
• Dual-handed inlet/outlet for flexible positioning
• Suitable for replacement of older units in restricted areas
• Available in “appliance white” finish for a cleaner aesthetic

Small homes or areas where hot water needs aren’t particularly high would find great use for the Thermann 80L Electric Storage Hot Water System. Made proudly right here in Australia, this system has top-notch insulation and a tough commercial-grade enamel tank to help keep the water hot and save energy costs. Install it indoors or outdoors; its small form and easy dual-handed inlet/outlet design make it simple. Perfect for people seeking consistent hot water free of effort!

FEATURES:

Heating Method: Electric

Hot Water Supply: Mains pressure, full flow to all outlets

Recovery Time: Moderate – suited to continuous daily use

Installation Location: Indoor or outdoor installation permitted

Water Pressure: Rated for 800 kPa maximum inlet pressure without an ECV (650 kPa with ECV)

Energy Efficiency: N/A

Operating Costs: Reduced running costs due to 50mm dense foam insulation

Best for: Small households with 1–2 people; ideal for units, studios, or low-use applications

Additional Features:

• Dual-handed plumbing connections for ease of installation
• Hard-wearing polymer base, rust-proof
• Compact footprint – suitable for space-restricted areas
• Australian-made with a commercial-grade enamel tank
• Dense insulation for heat retention and energy savings

Should you be looking for a dependable hot water system, the Thermann 160L Electric Storage Hot Water System is most certainly worth giving some thought. Families who always need hot water will find this to be a great option. It will be with you when most needed, so simplifying those busy mornings! Perfect for medium-sized houses, this system is energy-efficient and supplies hot water just when you need it. Designed in Australia, it has dual-handed plumbing, which makes installation easy. It’s made to last with premium commercial-grade enamel and complete mains pressure performance.

FEATURES:

Heating Method:
Electric storage heating element.

Hot Water Supply:
Mains pressure hot water delivery to all outlets.

Recovery Time:
Not specified directly; typical of electric storage tanks in this size category.

Installation Location:
Indoor or outdoor installations are supported.

Water Pressure:
Maximum inlet pressure without ECV: 800 kPa
Maximum inlet pressure with ECV: 650 kPa.

Energy Efficiency:
N/A

Operating Costs:
Reduced heat loss due to 50 mm dense foam insulation, which helps lower running costs.

Best for:
Medium-sized households requiring efficient and reliable hot water, suited for continuous hot water demand of 2–4 people.

Number of Bathrooms and People (Capacity):

• Suitable for 2 to 4 people under continuous tariff supply.

Additional Features:

• Dual-handed water connections for easier installation
• Commercial-grade enamel lining and thicker sacrificial anode for longer tank life
• Rust-proof polymer base
• Australian-made
• Designed for compatibility with various water conditions in Australia and New Zealand
• Compliant with AS/NZS standards for electrical and plumbing installations

Whether it’s a granny flat, studio apartment, or secondary bathroom, the Rheem 50L Electric Storage Hot Water System provides hot water quickly where and when you most need it. Rheem’s reliable quality and space-saving design make it a no-fuss approach to enjoy hot water daily without sacrificing performance or energy use.

FEATURES:

Heating Method: Electric immersion element

Hot Water Supply: Stored hot water, ready for immediate use

Recovery Time: Quick reheat for light to moderate usage

Installation Location: Indoor or outdoor (plug-in model for indoor only)

Water Pressure: Designed for mains pressure – strong flow at the tap

Energy Efficiency: N/A

Operating Costs: Cost-effective for smaller households or low usage areas

Best for: Small spaces, apartments, granny flats, or as a point-of-use system. Best suited for 1 person or 1 small bathroom (low to moderate use)

Additional Features:

• Compact 400mm diameter for tight spots
• Dual-handed plumbing connections for installation flexibility
• Recessed fittings for neat wall-mounting (wall bracket available)
• Plug & lead version available (2.4kW) for easy indoor installation
• Ideal for renovations or homes with limited access to hot water systems
• Backed by Rheem’s extensive service and support network

Smaller homes or businesses with moderate hot water consumption would find the Rheem 80L Electric Hot Water System ideal with its solid 80-litre capacity and compact form. This model is a great all-rounder whether you are fitting out a new space or updating an older system. Designed for durability and simplicity of use, the Rheem 80L provides constant hot water, energy savings with off-peak compatibility, and the peace of mind of a reputable Australian brand.

FEATURES:

Heating Method: Electric element (single)

Hot Water Supply: Stored hot water, ready when you need it

Recovery Time: Fast reheat options depending on element size

Installation Location: Suitable for both indoor and outdoor use

Water Pressure: Mains pressure – delivers a strong flow at all taps

Energy Efficiency: N/A

Operating Costs: Lower cost when connected to off-peak or controlled tariffs

Best for: Smaller households, apartments, or secondary bathrooms

Additional features:

• Slim 460mm diameter – great for tight spaces
• Durable Ultranamel® enamel lining for corrosion protection
• Dual-handed plumbing connections – flexible installation
• Recessed plug fittings for a neat appearance
• Simple like-for-like replacement for older systems
• Suitable for connection to off-peak electricity tariffs

For homes requiring a moderate amount of hot water, the Rheem 160L Electric Storage Hot Water System (Model 491160) is a reliable and efficient option. It is perfect for homes with three to four people because of its mains pressure performance and slim 480mm diameter. Made to last with Rheem’s Ultranamel® glass-lined steel cylinder, this unit offers flexible installation with dual-handed fittings and supports off-peak electricity tariffs for cost savings. It is a flexible choice for many Australian homes because it can be installed both indoors and outdoors.

FEATURES:

Heating Method: Electric immersion heating element

Hot Water Supply: Mains pressure, continuous availability

Recovery Time: Varies based on element rating (1.8kW, 2.4kW, 3.6kW); faster recovery with higher wattage

Installation Location: Indoor or outdoor

Water Pressure:

Max 960 kPa (with ECV)

Max 1120 kPa (without ECV)

Energy Efficiency: N/A

Operating Costs: Lower with off-peak electricity tariffs; compatible with concessional tariffs

Best for: Medium-sized households seeking reliable hot water for everyday use, especially where off-peak power is available

Additional Features:

• Compatible with off-peak electricity tariffs for cost savings
• Dual-handed water connections simplify installation
• Rheem Ultranamel® coating provides excellent protection against corrosion
• Designed for fast, easy replacement or retrofit
• Insulated to reduce heat loss and enhance energy efficiency
• Suitable for hard water areas with proper anode selection (black or blue anode, depending on water chemistry)